Buildings -
INFLATABLE - CONSTRUCTION
The inflatable shelter is assembles from air supported roof panels (each constructed from individually sealed airtight tube segments). The small shelter consists of a single roof panel plus two end wall panels. The large shelter consists of multiple roof panels, two end wall panels & an air lock.

More Information

---

MATERIAL
The material from which the shelter is constructed is an elastomer coated fabric which is designed to withstand and remain operational in temperatures ranging from minus 65 to plus 140 degrees Fahrenheit with possible solar heating on exposed surfaces of up to 185 degrees. It is also designed to be water impedent. Permanently resistant to fungus and fire retardant.

WEATHER RESISTANCE
The shelter is designed to withstand the following climatic conditions: § Rainfall as heavy as may be encountered at any locale. § Winds of up to 80mph or wind gusts of 120mph in any direction. § A daily relative humidity of 97% for 20 hours and 100% condensation for 4 hours. § Altitudes of up to 10,000 feet above sea level. § Withstand snow loads of up to 10 pounds per square foot.

APPROXIMATE DIMENSIONS
External Length Large Shelter 57 Feet (Excluding Air Lock) External Length Small Shelter 12 Feet External Width 23 Feet 4 Inches (Excluding Side Manifold) Internal Width 20 Feet External Height 11 Feet 8 Inches Max Internal Height 10 Feet at Apex Weight Large Shelter Approx 2350lbs

THE DETAILS ABOVE ARE TAKEN FROM THE MANUFACTURERS ORIGINAL SPECIFICATION AND ARE OFFERED AS A GUIDE ONLY

 

Rubber Huts -
Manufacturer - Rubb Building Systems from Gateshead
Model shelter type 6m x 24m THB (Large shelter)
Length of shelter 24m Span of shelter 6.1m
Height to eaves 2.1m
Height to apex 3.645m

10 x 2008067 - Full Set includes frame, ground sheet, cover, insulation and electric's Net weight 4000kg Price - Ј 2500

2 x 2008068 - Part set includes frame, cover, ground sheet and electric's Price - Ј 2250

2 x 2008069 - Part set includes frame, cover and ground sheet Price - Ј 2100

2 x 2008070 - Part set includes frame and cover only Price - Ј 2000

2 x 2008071 - Part set includes frame minus tension wires Price - Ј 1000

1 x 2008072 - Various spare parts and oddments Price - Ј 500

Each complete unit when separated can easily be transported inside a 20ft container, maybe even transportable on a 7Ѕ tonne lorry. We have erected one on site and we had the use of a forklift to assist in the erection of the Rubb hut. A set of large stepladders would be needed to build the frame. The electric's are 240V single phase 3pin external sockets.

Frequently asked question: What is the material and is it fire resistant?
The cover is fabricated from a high tenacity PVC polyester fabric and is fire retardant.
What is the insulating property of the insulation? (Will it keep damp out?)
The cover itself should keep the damp out and states the silver insulation is only bubble wrap sandwiched between aluminium foil and was only made especially for the forces.